Dyson V6, V7 V8 Vacuum Pulsing (On / Off) – 100% Guaranteed Fix

If your Dyson cordless vacuum keeps pulsing, surging, or turning on and off repeatedly, don’t panic — this is one of the most common issues with the Dyson V6, V7 and V8 models. This step-by-step guide from VacRevive Australia shows you exactly how to troubleshoot and permanently fix the problem.


🔧 Step 1 – Check for Blockages

Most pulsing issues come from airflow restrictions. Remove each component and make sure nothing is blocking suction:

  • Dustbin & Cyclone Connector : Empty the bin and clear any trapped debris.
  • Wand & Head : Detach the wand and look through it under light to ensure it’s clear.
  • Cleaner Head : Remove the roller brush for a full clean. If yours is worn or seized, consider replacing it with a genuine part like the Dyson V7–V15 Anti-Tangle Torque Drive Head .

Optional Parts for Cleaning and Replacement


🧽 Step 2 – Clean or Replace the Filters

Dirty filters cause reduced airflow, which makes the motor pulse to protect itself. Remove both the pre-filter and the post-HEPA filter, wash them with cold water, and let them dry completely (24 hours minimum). If they still smell or look stained, replace them:


⚙️ Step 3 – Inspect the Battery & Motor

If the vacuum still pulses after clearing blockages and cleaning filters, the issue may be power delivery. Weak batteries or faulty motor sensors can cause intermittent cut-outs.


🔩 Step 4 – Check the Bin Runner and Seals

Loose or damaged bin runners / sealing rings allow air leaks that trigger pulsing. Inspect the latch and rubber seals; replace if worn:


💡 Step 5 – Test Your Dyson

Re-assemble your vacuum and test it. If the motor now runs smoothly without stopping, congratulations — you’ve fixed the pulsing issue! If not, the internal motor assembly may need replacement; we can help.


✅ Guaranteed Results with VacRevive

Every product we sell is tested and verified by our in-house Dyson specialists. Whether you need batteries, cleaner heads, or full refurbished Dyson units, we’ve got you covered.

For professional Dyson repair service or expert advice, visit VacRevive.com.au or contact our Melbourne workshop today.

VacRevive – Dyson Cordless Vacuum Specialists | Repairs • Parts • Service • Full Sets

Dyson V6, V7 V8 Vacuum Pulsing (On / Off) – 100% Guaranteed Fix
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.